Walk Down the power-tool aisle at Home Depot or Lowe’s and every major brand pushes a two-tool box containing a cordless drill and an impact driver. To a first-time buyer, they look like the exact same gun-shaped tool twice.

If you only hang picture frames, assemble flat-pack furniture, and tighten the occasional cabinet hinge, a single cordless drill covers everything you do. If you build decks, frame walls, sink three-inch screws into studs, or hate stripping screw heads, you want both tools, and buying them together in a two-tool combo kit costs far less than adding the impact driver later.

The difference, in one sentence

A drill spins continuously for clean holes and controlled clutch settings; an impact driver hammers rotationally in rapid concussive bursts to drive long fasteners without twisting your wrist.

As one clear breakdown on r/HomeImprovement explained: “A drill has a chuck that will hold drill bits of varying sizes. An impact driver has a hex collet that holds 1/4 hex bits only. The drill also typically has an adjustable clutch to limit torque, or how deep screws are sunk.”

Because a drill has a keyless three-jaw chuck and a numbered slip clutch around the collar, you can dial the torque down so a small screw stops flush in drywall or soft pine instead of punching straight through. It spins smoothly and concentrically, making it the right choice for drilling clean holes in wood, metal, or tile.

An impact driver is shorter, stubbier, and has no slip clutch. When a long screw hits dense lumber or a knot, an internal anvil begins striking rotationally dozens of times per second. That rotational hammering keeps the bit seated firmly in the screw head and transfers zero reactionary twist back into your hand. As an experienced r/Tools commenter put it:

“A drill will break your wrist when the torque suddenly gets too high. An impact driver won’t. Modern drills imho will often outperform an impact on static drive speed. Torque can compound over multiple hits to provide higher metrics when using an impact. So yes it’s speed vs torque.”

So do you need both?

Homeowners who finally try an impact driver after years of using only a drill almost always say the same thing. One convert on r/Tools wrote, “Impact driver. I had a perfectly good battery drill, and it did everything I thought I needed it to. Then I tried an impact driver at a demo display. I bought one shortly after. Just the one regret - that I didn’t buy one sooner.” Another user in a tool-payback thread noted that an impact driver “paid for itself just in saved screws many, many times over.”

Owning both also eliminates the most annoying part of weekend woodworking: chucking and unchucking bits every thirty seconds. You leave a pilot drill bit or countersink in the drill, clip a T25 or Phillips driver bit into the impact driver, and alternate between the two with one hand.

Who can skip the impact driver: Apartment dwellers and light DIYers whose projects stop at drywall anchors, curtain rods, and IKEA bookcases. On small fasteners and soft particleboard, an impact driver’s concussive hits can snap screw heads clean off if you aren’t careful with the variable-speed trigger.

Who should get both: Anyone tackling fencing, decking, subfloors, garage shelving, lag bolts, or exterior repairs. As one homeowner on r/HomeImprovement called it, a 1/4-inch cordless impact driver is the most useful tool you can own for the vast majority of projects around the house.

Can’t a drill just do everything?

For light household chores, yes. Modern brushless drills pack plenty of speed and will sink a two-inch wood screw into a pine stud without complaint.

The trouble starts when you drive twenty 3-inch structural screws in a row, or try to back out an old, paint-crusted deck screw. A standard drill pushes continuously until either the bit cams out and strips the screw head, or the bit binds and yanks the handle sideways in your grip. The impact driver’s rotational blows break stubborn fasteners loose and sink long screws flush while keeping the tool steady in one hand.

What to buy

Because cordless tool companies price bare batteries nearly as high as full starter kits, the smartest purchase is a two-tool combo kit that bundles a brushless drill, an impact driver, two batteries, and a charger in one box.

Keep in mind that your first combo kit locks you into a battery platform. As one commenter on r/Tools quoted their brother: “‘Whatever your first 18V power-tool was, THAT is the brand that you will be loyal to, for life.’ It comes down to batteries and chargers. Batteries are prohibitively expensive, so that combo kit that you bought? You want to use the same batteries and charger to save money on future tools.”

The DeWalt 20V MAX drill-and-impact combo is the perennial value leader on Amazon and at hardware stores, frequently dropping near $149 during holiday sales. When a 13-year-old DeWalt drill finally gave up the ghost in an r/Tools post, the top reply on r/Tools summed up the consensus: “Getting 13 years out of the DeWalt would sell me on another DeWalt.”

If you want compact pro tools or automotive specialty gear down the road, Milwaukee (both M12 and M18) and Makita (18V LXT) sit alongside DeWalt at the top of the jobsite tier. As one homeowner noted on r/HomeImprovement, running “Milwaukee for everything else (drills, impacts, nailers, multitools, etc)” gives you a massive pro catalog. If you want the lowest entry price and dozens of cheap lawn and garage tools on the same battery, Ryobi ONE+ is the budget favorite. Even pros admit its value, like a trim carpenter on r/Tools who used an old Ryobi combo kit solo and called it “dollar for dollar the best option I see here.”

We compare all five ecosystems side by side in the best power tool brand on Reddit.

Where the “buy both” advice misleads

Because r/Tools is full of tradespeople and serious garage builders, “buy the brushless combo” is an automatic reflex there. Before spending extra, think about what sits on your to-do list.

If you live in a condo and open your toolbox twice a year, a compact 12V drill (or even a basic 18V drill kit) takes up half the closet space and does every job you need. Don’t get sucked into comparing peak inch-pound torque numbers on spec sheets either; any mid-range brushless kit from DeWalt, Milwaukee, Makita, Bosch, or Ryobi has more than enough power for home framing and repairs.

Common questions

Can an impact driver drill holes? Yes, if you buy drill bits with a 1/4-inch hex shank. It works fine for rough holes in studs or framing lumber, though the slight play in a hex collet and the hammering action make it louder and less precise than a regular drill chuck.

Do I really need an impact driver, or just a drill? If you only own one tool, make it a drill. It drills clean holes and has a clutch for delicate screws. Add the impact driver (or buy the combo from day one) if you build with dimensional lumber, drive long screws, or want a second driver so you never have to swap bits mid-project.

Is a drill or an impact driver better for driving screws? Use a drill on low clutch settings for drywall anchors, outlet faceplates, cabinet hardware, and flat-pack furniture. Use an impact driver for 2.5-inch and 3-inch wood screws, deck screws, and lag bolts.

Should I buy them separately or as a combo? Always check the two-tool combo price first. Retailers discount drill-and-impact bundles heavily as loss leaders to get you onto their battery platform, so the two-tool kit with two batteries often costs only $30 to $40 more than the drill alone.

Which one to buy first

If your home projects stop at hanging curtains and assembling bookcases, buy a single drill and save your shelf space. For anyone planning real DIY repairs, woodworking, or yard structures, grab the two-tool drill and impact combo on a single battery platform so you have both finesse and raw torque ready to go.

To pick the right battery ecosystem before you buy, read Milwaukee vs DeWalt vs Ryobi vs Makita vs Bosch. Once your power tools are sorted, see how r/Tools weighs hand-tool upgrades in Knipex vs Channellock pliers and whether Wera screwdrivers are worth the money.